PRODUCTS DESCRIPTION & SPECIFICATION
Construction Projects And Product Types:
Project Types:
• Private Projects such as Houses, Villas, Palaces and other.
• Public Projects such as Malls, Hospitals, Clinics, Airports, Mosques, Universities, Schools, Hotels, Restaurants, Cafeterias, Kitchens, Gardens, Prisons, Trains Stations, Stadiums and other.
Products Type:
These products are used for Private and Public Projects but with different models depending on the project type and BOQ Specifications and Descriptions:
• Mixers, Faucets and Taps
• Shut-Off
• Angle Valve
• Bathtubs
• Shower Trays
• Shower Cabins
• Bathrooms Furniture
• Mirrors
• Flush Valve
• Water Heaters
• Boilers
• Wash Basin P Trap
• Drainer
• Sinks For Kitchen
• Hand Dryers
• Pipes For Cold And Hot Water
• Vitreous China Bathroom Sets
• Bathroom Accessories
• Furniture
These products are used for only Public Projects but with different models depending on the projects types and BOQ Specifications and Descriptions:
• Stainless Steel Bathroom Sets
• Special Models For Handicap And Health Care Bathroom Sets
• Stainless steel Washroom Equipment products
• Stainless steel cubicles and partitions
• Sensor Mixers
• Temporized Mixers.
Product description & Accessories:
The basic raw material of a mixer is the copper required with special mixtures for the success of the process of casting and copper manufacturing. The design of MIXOCRO mixers with one single lever considered new generation models that allows access to hot and cold water together in the same time, in addition to the traditional mixers models with their each component are all in compliance with the European regulations are as the following:
• The cartridges are made in Italy by using high quality materials, totally non-toxic, in order to be very strong and resistant up to 50 bar water hammer. They have both a high working capacity and a low working noise level according to the European Norm.
• The cartridges inside the single-lever mixers are characterized by high flow and low noise, with compliance of international standards and regulations.
• The sintered ceramic discs with a low friction coefficient have a low friction level and a very smooth movement and an easy functionality even after many years of use.
• The head valves used for the traditional faucets and taps are oil bath type ones and they are stronger than the standard ones because they are made with completely non-toxic quality materials in order to more effectively withstand the stresses of use.
• Assembly torque maximum = 20 Nm. On certain items or on request, we use also the ceramic type, which is even higher quality and very strong. All materials used are non-toxic and the ceramic head valves are projected to resist from 5 degree Celsius up to 90 degree Celsius and their free flow rate is around 30 l/min at 30 bars. They have a low working noise level, in accordance with the European norm.
• The ceramic head valve characterized by high quality and made of advanced materials are available upon request.
• The working-noise level is compliance with European regulations.
• The refinery complex called aerator in the head or spout of the mixer pipe is made from the best and the highest quality raw materials and designed to reach and to guarantee the maximum smooth water flow capacity, the minimum noise level and the Maximum durability, longest lifetime.
• Starting from the mid-range taps, the high-tech aerators equipped with cleaning key and weekly maintenance are included in the packaging.
• The flexible hose are produced and assembled by a company specialized in the production of braided flexible hoses for plumbing with higher quality since more than twenty years, using best and finest materials to be flexible and soft in the process of connecting the mixer and to be at the same time very strong.
• The temporize taps are of different shapes and models, the push bottom process one-time permit access to a specific quantity of water for a certain period of time ranging between 6 and 8 seconds only and than are self closing by cutting off the water automatically which helps and contributes to the preservation of water consumption and the water use responsibly to avoid roaring without supervision, especially in public places like: parks, schools, mosques and other.
• All mixers are tested in two ways, first by 100% air and second is done on variable percentage, by 4 bar water.
Angle Valves are two types:
• The first main type is installed internally, built in and is using for cold and hot water, with multiple measurements as follows: ½, ¾, 1", and allows the water access and or the water cut off flow to the home sections.
• The second type is the stopcock small angle valve shape with multiple measurements as follows: ½ x ½ and ½ x 8/3.
The shut-off is a relatively small-sized shower compared with various models of the conventional shower in the shower and bear pressure degree up to 5 bar.
MIXOCRO ensures the provision of spare parts for all mixers models and products upon request.
WARRANTY AND CONTROL:
MIXOCRO guarantees the mixers for a period ranging between two and five years, except in the case of: wrong installation of the mixer, the use of the wrong tools in the installation, the use of the non-original spare parts, cleaning the mixer with chemicals, misuse, and subjecting the product to poor consumption.
MIXOCRO guarantees its single-lever mixers and traditional taps from manufacturing defects for a period of 5 years from the date of purchase, extended by the personal will of the company.
The remaining products use a standard warranty for a period of 2 years from date of purchase (in accordance with the European production terms of guarantee).
All products comply with European regulations UNI EN 817, UNI EN 816 AND UNI EN 1111 and are 100% air-tested and in a variable percentage are tested on 4 bar water pressure.
The traditional mixers are also designed according to European regulation UN EN 817.
The models with diverter are 100% air-tested, models without diverter are tested under a 3 bar water pressure.
All taps are equipped with ceramic cartridge produced in Italy, tested for 1.000,000 movements, and provide with an inspection certificate and a hologram that guarantees the authenticity of the product.
In the production process only top quality raw materials supplies are used. 100% of the production cycle is done internally, as well as the polishing department, the chrome plating machineries and the latest next-generation machines.
Cartridges and flexible are 100% Italian production.
The flexible hoses supplied with the mixers are manufactured in Italy, by a company specialized in the production of braided and hydraulics flexible hoses for over twenty years, certified according to EN ISO 9001:2000 by the authoritative German certification agency TUV Thüringen.
MANUALS INSTALLATION AND PRESENTATIONS:
MIXOCRO taps are easy to install. We believe a correct installation of the mixer and a right maintenance increase the product’s lifetime.
All of the taps are equipped with a multilingual SIMPLE AND PRACTICAL MANUAL ISTALLATION, OPERATION AND MAINTENANCE covering all the different types of products (washbasin, bidet, bathtub, built-in).
• The special taps, such as sensor ones, are equipped with a proper user manual.
• The multi-jet kits are also equipped with a proper user manual.
• The manual provides comprehensive instructions for assembling, warnings, directions for cleaning and warranty, use parameters and all technical data for classification and type of used materials.
• The rough technical dimensional drawings of all of our products can be found on this site in the product details tab.